Nissan 2013 Murano - Owner's Manual Bedienungsanleitung PDF herunterladen (Seite 206)

Black plate (204,1)

[ Edit: 2012/ 7/ 31 Model: Z51-D ]

3-52 Pre-driving checks and adjustments

Cancel or activate entry/exit function

GUID-58D4463D-3833-4D6F-AB39-9C380DA99AC9

The selector lever must be in the P (Park)

position with the ignition switch in the OFF

position.

The entry/exit function can be activated or

canceled by pressing and holding the SET

switch for more than 10 seconds.

The indicator lights on the memory switches (1

and 2) will blink once when the function is

canceled, and the indicator lights will blink twice

when the function is activated. Note that the

indicator lights may illuminate after 5 seconds

while holding the SET switch. This indicates

readiness for linking the Intelligent Key to a

stored memory position. Keep the SET switch

pressed for more than 10 seconds to turn on or

off the entry/exit function.

The entry/exit function can also be activated or

canceled if the “Lift Steering Wheel on Exit” key

or “Slide Driver Seat Back on Exit” key is turned

to ON or OFF in the “Comfort” settings. (See

“Vehicle information and settings” in the “4.

Monitor, heater, air conditioner, audio, phone

and voice recognition systems” section.)

Initialize entry/exit function

GUID-3B7D11F0-51D7-4A5F-B078-9C3A3C24A746

If the battery cable is disconnected, or if the fuse

opens, the entry/exit function will not work

though this function was set on before. In such

a case, after connecting the battery or replacing

with a new fuse, open and close the driver’s

door more than two times after the ignition

switch is placed in the LOCK position from the

ON position. The entry/exit function will be

activated.

SPA2756

MEMORY STORAGE

GUID-1645D943-6DDE-4A8E-B347-C359AF16FEDF

Two positions for the driver’s seat, steering

column and outside mirrors can be stored in the

automatic drive positioner memory. Follow these

procedures to use the memory system.

1. Move the selector lever to the P (Park)

position.

2. Push the ignition switch to the ON position.

3. Adjust the driver’s seat, steering column and

outside mirrors to the desired positions by

manually operating each adjusting switch.

For additional information, see “Seats” in the

“1. Safety — Seats, seat belts and supple-

mental restraint system” section and “Tilt/

Condition:

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 506 507

Kommentare zu diesen Handbüchern

Keine Kommentare

Nissan 2013 Murano - Owner's Manual Bedienungsanleitung Seite 206

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Nissan 2013 Murano - Owner's Manual