Nissan 2014 Quest - Owner's Manual Bedienungsanleitung PDF herunterladen (Seite 348)

the low tire pressure warning light

OFF. If the light still illuminates

while driving after adjusting the tire

pressure, a tire may be flat. If you

have a flat tire, replace it with a

spare tire as soon as possible. (See

“Flat tire” (P.6-3) for changing a flat

tire.)

. When a spare tire is mounted or a

wheel is replaced, the TPMS will not

function and the low tire pressure

warning light will flash for approxi-

mately 1 minute. The light will

remain on after 1 minute. Contact

your NISSAN dealer as soon as

possible for tire replacement and/

or system resetting.

. Replacing tires with those not ori-

ginally specified by NISSAN could

affect the proper operation of the

TPMS.

. Do not inject any tire liquid or

aerosol tire sealant into the tires,

as this may cause a malfunction of

the tire pressure sensors.

CAUTION

. The TPMS may not function properly

when the wheels are equipped with

tire chains or the wheels are buried

in snow.

. Do not place metalized film or any

metal parts (antenna, etc.) on the

windows. This may cause poor re-

ception of the signals from the tire

pressure sensors, and the TPMS will

not function properly.

Some devices and transmitters may temporarily

interfere with the operation of the TPMS and

cause the low tire pressure warning light to

illuminate. Some examples are:

. Facilities or electric devices using similar

radio frequencies are near the vehicle.

. If a transmitter set to similar frequencies is

being used in or near the vehicle.

. If a computer (or similar equipment) or a DC/

AC converter is being used in or near the

vehicle.

FCC Notice:

For USA:

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and

(2) this device must accept any interfer-

ence received, including interference that

may cause undesired operation.

Note: Changes or modifications not ex-

pressly approved by the party responsible

for compliance could void the user’s

authority to operate the equipment.

For Canada:

This device complies with RSS-210 of

Industry Canada. Operation is subject to

the following two conditions: (1) this

device may not cause interference, and

(2) this device must accept any interfer-

ence, including interference that may

cause undesired operation of the device.

Starting and driving 5-5

1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 481 482

Kommentare zu diesen Handbüchern

Keine Kommentare