Nissan 2014 Quest - Owner's Manual Bedienungsanleitung PDF herunterladen (Seite 356)

NOTE:

Care should be taken to avoid situations

that can lead to potential battery discharge

and potential no-start conditions such as:

1. Installation or extended use of electro-

nic accessories that consume battery

power when the engine is not running

(Phone chargers, GPS, DVD players,

etc.)

2. Vehicle is not driven regularly and/or

only driven short distances.

In these cases, the battery may need to be

charged to maintain battery health.

CONTINUOUSLY VARIABLE TRANS-

MISSION (CVT)

The Continuously Variable Transmission (CVT)

in your vehicle is electronically controlled to

produce maximum power and smooth operation.

The recommended operating procedures for this

transmission are shown on the following pages.

Follow these procedures for maximum vehicle

performance and driving enjoyment.

Engine power may be automatically re-

duced to protect the CVT if the engine

speed increases quickly when driving on

slippery roads or while being tested on

some dynamometers.

Starting the vehicle

1. After starting the engine, fully depress the

foot brake pedal before moving the shift

lever out of the P (Park) position.

This CVT is designed so that the foot

brake pedal must be depressed before

shifting from P (Park) to any driving

position while the ignition switch is in

the ON position.

The shift lever cannot be moved out of

the P (Park) position and into any of

the other positions if the ignition

switch is pushed to the LOCK, OFF or

ACC position.

2. Keep the foot brake pedal depressed and

move the shift lever to a driving position.

3. Release the parking brake and foot brake

pedal, and then gradually start the vehicle in

motion.

WARNING

. Do not depress the accelerator

pedal while shifting from P (Park)

or N (Neutral) to R (Reverse), D

(Drive) or L (Low) position. Always

depress the brake pedal until shift-

ing is completed. Failure to do so

could cause you to lose control and

have an accident.

. Cold engine idle speed is high, so

use caution when shifting into a

forward or reverse gear before the

engine has warmed up.

. Never shift to P (Park) or R (Re-

verse) while vehicle is moving. Fail-

ure to do so could cause you to lose

control and have an accident.

Starting and driving 5-13

DRIVING THE VEHICLE

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 481 482

Kommentare zu diesen Handbüchern

Keine Kommentare