Nissan 2014 Quest - Owner's Manual Bedienungsanleitung PDF herunterladen (Seite 437)

8-32 Maintenance and do-it-yourself

hours, or driven less than 1 mile (1.6

km) at moderate speeds. The recom-

mended cold tire inflation is set by the

manufacturer to provide the best

balance of tire wear, vehicle handling,

driveability, tire noise, etc., up to the

vehicle’s GVWR.

*

5

Tire size — see “Tire labeling” (P.8-

33).

*

6

Spare tire size or compact spare tire

size (if so equipped)

SDI1949

Checking the tire pressure

1. Remove the valve stem cap from the

tire.

2. Press the pressure gauge squarely onto

the valve stem. Do not press too hard or

force the valve stem sideways, or air will

escape. If the hissing sound of air

escaping from the tire is heard while

checking the pressure, reposition the

gauge to eliminate this leakage.

3. Remove the gauge.

4. Read the tire pressure on the gauge

stem and compare it to the specifica-

tion shown on the Tire and Loading

Information label.

5. Add air to the tire as needed. If too

much air is added, press the core of the

valve stem briefly with the tip of the

gauge stem to release pressure. Re-

check the pressure and add or release

air as needed.

6. Install the valve stem cap.

7. Check the pressure of all other tires,

including the spare.

1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 481 482

Kommentare zu diesen Handbüchern

Keine Kommentare